I replaced the legs on two homemade tables in order to make them more stable and attractive. The tables support radio and computer equipment and needed stronger and more stable legs. This set of legs is the second of this sort that i have bought and installed. It features a wide mounting plate that is really essential for longitudinal stability. The legs are well constructed, the welds are good, and there are ten mounting holes (for screws) on each plate. Be aware that the screw may be too long for the thickness of your table top. They are 1", and my table top is 3/4" plywood, so I had to purchase screws. The finish on the legs is matte, and it is just a shade off pure black, looking slightly grey next to the legs on my other table; however, you really need to look to notice. The other set of legs that I used are similar to these and were chosen because there are 3 legs per table end, with the center leg being offset a few inches to provide stability. That arrangement is more stable than these legs, but the second table is half as big and less loaded, so these legs are sufficiently stable. I recommend these table legs and wish that I had fixed my tables a long time ago.